ISUZU 4x4 B Class Fire Foam Fighting Truck

The ISUZU 4×4 emergency fire pickup is powered by a 143 HP 4KH1CT6H1 diesel engine, paired with a compact 4×4 chassis that moves easily through tight spaces and rough terrain. It carries 800L total—600L water and 200L foam. A JBQ 5.5/10 pump delivers 10 L/s at 0.55 MPa, while the PL8/24 roof monitor provides 42m water reach and 55m foam range for quick attack on small to medium fires. Standard delivery includes hoses, suction line, couplings, foam gun, and basic tool kit.

This ISUZU GIGA FVR 4×4 runs on a 300 HP 6HK1-TCG60 diesel engine with a 4×4 chassis built for rough terrain. Total fluid capacity reaches 3,500 liters—split between 3,000L of water and 500L of foam. Fire suppression is handled by a CB10/40-XZ pump (40 L/s) and a PL8/32 roof monitor with 60m water and 48m foam reach. A full set of standard gear comes with the truck, including hoses, suction line, couplings, foam gun, and tool kit.

The ISUZU fire department utility truck for Senegal is built on an ISUZU FVR 4×4 chassis with a 4500 mm wheelbase. It runs on a 4HK1-TC50 engine rated at 205 HP with a manual transmission. The truck carries a 6000L water tank and a 4000L foam tank. A CB10/60 pump (60 L/s at 1.0 MPa) and a roof mounted PS48 monitor (48 L/s, water ≥60 m, foam ≥70 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

This Isuzu 3cbm water tanker fire truck is based on an Isuzu 100P 4x4 double-cab chassis with a 3360mm wheelbase. It is equipped with an Isuzu 4KB1-TCG60 engine and an MSB 5-speed gearbox. The front of the superstructure houses the equipment compartment, the middle section contains a 300L carbon steel water tank, and the rear is the pump room, equipped with a CB10/60-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PS8/30W fire monitor is mounted on the roof.