The Isuzu FVR 6 cubic meter foam fire truck uses an Isuzu FVR chassis with a 4500mm wheelbase. It is equipped with an Isuzu 6HK1-TCL engine, a Fast 8-speed transmission, a 5-ton carbon steel water tank (with anti-corrosion treatment), a 1-ton 304 stainless steel foam tank, a Shanghai Xiongzhen CB10/40 low-pressure fire pump (rear-mounted pump room), a Chengdu West PL32 fire monitor, and a 30-meter medium-pressure hose reel in the pump house.

The ISUZU 4000L water fire truck runs on a 4HK1-TC engine rated at 175 HP, built on a 4×2 ISUZU chassis. A 4,000L water tank sits behind the cab, with a CB10/30-RS fire pump (30L/s at 1.0MPa) mounted in the rear pump room. A PS8/30W roof monitor delivers a water range of ≥60m, covering a full 360° horizontally and -35° to 70° vertically. The equipment compartments on both sides provide storage for fire hoses, suction tubes, and rescue tools, with all standard accessories included.

The ISUZU fire department utility truck for Senegal is built on an ISUZU FVR 4×4 chassis with a 4500 mm wheelbase. It runs on a 4HK1-TC50 engine rated at 205 HP with a manual transmission. The truck carries a 6000L water tank and a 4000L foam tank. A CB10/60 pump (60 L/s at 1.0 MPa) and a roof mounted PS48 monitor (48 L/s, water ≥60 m, foam ≥70 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The ISUZU NPR 189HP 4x2 foam water fire tender truck for the Philippines is built on an ISUZU 4×2 chassis with a 3815 mm wheelbase. It runs on a 4HK1-TCG61 engine rated at 189 HP with an Allison automatic transmission. The truck carries a 2500L water tank and a 1000L foam tank. A CB10/40 pump (40 L/s at 1.0 MPa) and a roof mounted PL8/32 monitor (32 L/s, water ≥60 m, foam ≥48 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The ISUZU GIGA 240HP emergency fire pumper is powered by a 240 HP 6HK1-TCG61 engine on a 4×2 chassis. It features a 6000L water tank and a 2000L foam tank, a CB10/60 fire pump (60 L/s), and a PL8/48 monitor (48 L/s, water ≥70m, foam ≥65m). Standard gear includes fire hoses, suction tubes, couplings, foam gun, and basic tool kit. Additional equipment includes sandwich PTO, pipeline system, equipment box, pump box, flip pedal, and electric system.

The ISUZU GIGA fire engine is powered by a 219 HP 6HK1-TCG60 engine on a 4×2 chassis. It features a 6000L water tank and a 2000L foam tank, a CB10/40 fire pump (40 L/s), and a PL8/32 monitor (32 L/s, water ≥60m, foam ≥48m). Standard gear includes fire hoses, suction tubes, couplings, foam gun, and basic tool kit.

The Isuzu GIGA 6X4 10 cubic meter foam fire truck is based on the Isuzu GIGA 6X4 chassis, with a wheelbase of 4600mm+1370mm. It is equipped with an Isuzu 6UZ1-TCG61 engine and a Fast 12-speed transmission. The front of the superstructure houses the equipment compartment, the middle section contains an 8500L carbon steel water tank and a 1500L stainless steel foam tank, and the rear is the pump room, equipped with a CB10/60-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PL8/48 fire monitor is located on the roof.

The Isuzu 12000L fire sprinkler truck uses an Isuzu FVZ GIGA 6X4 chassis with a 4650+1370mm wheelbase. It is equipped with an Isuzu 6HK1-TCG60 engine and a FAST 9-speed transmission. The front of the superstructure houses the pump house, which contains a CB10/60-RS fire pump and a control panel. Behind the pump house is a 12-cubic-meter carbon steel water tank. The rear features a work platform with a toolbox, side sprinklers, a ladder at the rear of the tank, a level gauge, right-side sprinkler heads, a removable top guardrail, and a PS8/50W fire monitor.