HOWO 4x2 emergency rescue fire fighting truck with 3600 L/min pump

The HOWO 8×4 industrial fire tender runs on an MC11.46-61 engine rated at 463 HP, paired with a heavy-duty 8×4 chassis. Up front, the equipment compartment has aluminum treadplate walls and houses fire hoses, suction tubes, and basic rescue tools. The main body carries a 20,000L water tank and a 5,000L foam tank, both made of carbon steel. At the rear, the pump room holds a CB10/100 fire pump (100L/s at 1.0MPa), control panel, and accessories like filters, couplings, and foam nozzles. A PL8/80 roof-mounted monitor provides 360° rotation and a range of ≥45m.

The Howo TX 4x2 7.5 cubic meter foam fire truck uses the Howo TX chassis with a 4700mm wheelbase. It is equipped with a Weichai WP4.6NQ240E62 engine and a Sinotruk HW95508STCL gearbox. The front of the superstructure is an equipment box for storing auxiliary firefighting equipment. The middle section contains a 5.5 cubic meter carbon steel water tank and a 2 cubic meter stainless steel foam tank. The rear pump room is equipped with a CB10/40-LC(BS) fire pump, control panel, firefighting equipment, PL8/32 fire monitor on the tank top, and two European standard manholes.

The Howo TX460 6x4 12 cbm foam fire truck adopts a Sinotruk TX 6x4 cab, with a 4600+1400mm wheelbase, and is equipped with a SINOTRUK MC11.46-61 engine and an HW19710 gearbox. The front of the superstructure houses an equipment compartment for storing various firefighting equipment, while the middle section contains a 9 cubic meter carbon steel water tank and a 3 cubic meter foam tank. The rear section houses the pump room, equipped with a CB10/60-RS fire pump, a control panel, and some auxiliary firefighting equipment. The water and foam tanks on the roof are equipped with manholes, and a PL8/48 fire monitor is also included.