The SITRAK 8×4 18500L foam fire truck is built on a SITRAK ZZ5446V516MF1 8×4 chassis with a 1950+4600+1400 mm wheelbase. It is powered by an MC11.46-61 engine rated at 460 HP and paired with a manual transmission. The vehicle carries a 12000L water tank and a 6500L foam tank. A Hill CB10/150-8FC fire pump (150 L/s at 1.0 MPa) and a roof mounted Akron PLKD10/100B-5178 monitor (100 L/s, water ≥90 m, foam ≥85 m) handle fire suppression. Standard equipment includes fire hoses, suction tubes, couplings, foam gun, and basic tool kit.

The HOWO 6x4 heavy rescue foam fire truck uses a SINOTRUK HOWO 6x4 chassis with 4600+1400 mm wheelbase. It runs on an MC11.46-61 engine rated at 460 HP with a manual transmission. The truck carries a 14700L water tank and a 3300L foam tank. A CB10/80 fire pump (80 L/s at 1.0 MPa) and a roof mounted PL8/64 monitor (64 L/s, water ≥60 m, foam ≥70 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The Isuzu GIGA 6X4 10 cubic meter foam fire truck is based on the Isuzu GIGA 6X4 chassis, with a gross vehicle weight of 35 tons and a wheelbase of 4800+1370mm. It is equipped with an Isuzu 6WG1-TCG62 520hp engine and a Fast 12-speed transmission. The front of the superstructure houses the equipment compartment, the middle section contains an 8000L carbon steel water tank and a 2000L stainless steel foam tank, and the rear is the pump room, equipped with a CB10/140-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PL8/64 fire monitor is located on the roof.

The Beiben 2638 6x4 fire truck is equipped with a Weichai WP10.380E32 engine and a FAST 12JS160T gearbox. The front of the truck bed is an equipment compartment with aluminum alloy anti-slip textured walls, storing various equipment. The middle section houses a 10-cubic-meter carbon steel water tank and a 2-cubic-meter foam tank. The rear pump room is equipped with a CB10/60-RS fire pump, control panel, fire hoses, and tools including a water collector, fire nozzles, and foam guns. A PL8/48 fire monitor is mounted on the roof of the truck bed.

The Fire Truck Foam Cannon PL48 is a manual fire monitor that can spray both foam and water. It has a rated flow rate of 48 L/s, a rated pressure of 0.8 MPa, a water spray range of ≥70 m, and a foam spray range of ≥60 m. The monitor can rotate 360° horizontally and has an elevation angle of -30° to 70°, offering flexible operation.

The HOWO rescue tender is powered by an MC07H.35-60 engine rated at 350 HP, built on a 4×2 chassis. At the front, a winch with 7000 kg capacity handles vehicle recovery or obstacle clearing. The rear section carries a hydraulic folding crane with a 5-ton lifting capacity and 8.3m reach. The equipment body features roll-up aluminum shutters on both sides, LED lighting, and fold-down steps for easy access. A roof-mounted mast lighting system extends up to 8m, powered by a 15kVA generator for night operations.

The Fire Truck Foam Cannon PL24 is a high-efficiency firefighting device for medium- and long-range fire suppression, featuring high flow rate, long range, and stable spray. PL24 fire monitor can switch between direct current and spray modes, improving fire suppression efficiency while maintaining a safe distance, meeting various firefighting needs.

The Isuzu GIGA 6X4 10 cubic meter foam fire truck is based on the Isuzu GIGA 6X4 chassis, with a gross vehicle weight of 35 tons and a wheelbase of 4800+1370mm. It is equipped with an Isuzu 6WG1-TCG62 520hp engine and a Fast 12-speed transmission. The front of the superstructure houses the equipment compartment, the middle section contains an 8000L carbon steel water tank and a 2000L stainless steel foam tank, and the rear is the pump room, equipped with a CB10/140-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PL8/64 fire monitor is located on the roof.