72 Meter Aerial Ladder Fire Fighting Foam Fire Truck

The HOWO 25 meter aerial platform fire truck runs on an MC07H.35-60 engine (257 kW) with a HOWO 4×2 chassis. It features a 4-section telescopic ladder reaching 25m high and 15m out. The truck carries 2,000L of water and 350L of foam. A CB10/60-MBP pump delivers 3,600 L/min, and the roof monitor has a 65m range. The 300 kg work platform includes auto-leveling. Safety features include overload cutoff, tilt protection, and a 5m LED mast light for night operations.

The SITRAK HOWO 18m aerial ladder fire truck is powered by an MC07H.35-60 engine rated at 350 HP, built on a 4×2 chassis. At the front, a winch with 75 kN pulling capacity handles light vehicle recovery or debris clearing. The rear section carries an 18m telescopic ladder system with a 60 L/s CB10/60 fire pump and a roof-mounted PS60 monitor. The equipment body features roll-up aluminum shutters on both sides, LED lighting, and fold-down steps for easy access. The ladder system reaches 18m working height, powered by the truck’s own hydraulic system for firefighting and rescue operations.

ISUZU GIGA VC66 heavy duty water foam tanker Fire Engine is a professional pumper firefighting vehicle, equipped with 6UZ1-TCG61 diesel engine with 380HP and 9839cc emission.Matched working with a CB10/60 fire pump and a PL8/48 fire monitor on top, with efficiently working distance for water 65 meters and foam 55m. The POWERSTAR foam pumper fire truck is particularly suited for combating complex fires in petrochemical plants, community, ports, and similar environments

The ISUZU NPR 189HP 4x2 foam water fire tender truck for the Philippines is built on an ISUZU 4×2 chassis with a 3815 mm wheelbase. It runs on a 4HK1-TCG61 engine rated at 189 HP with an Allison automatic transmission. The truck carries a 2500L water tank and a 1000L foam tank. A CB10/40 pump (40 L/s at 1.0 MPa) and a roof mounted PL8/32 monitor (32 L/s, water ≥60 m, foam ≥48 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The Isuzu GIGA 6X4 10 cubic meter foam fire truck is based on the Isuzu GIGA 6X4 chassis, with a wheelbase of 4600mm+1370mm. It is equipped with an Isuzu 6UZ1-TCG61 engine and a Fast 12-speed transmission. The front of the superstructure houses the equipment compartment, the middle section contains an 8500L carbon steel water tank and a 1500L stainless steel foam tank, and the rear is the pump room, equipped with a CB10/60-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PL8/48 fire monitor is located on the roof.

The ISUZU fire department utility truck for Senegal is built on an ISUZU FVR 4×4 chassis with a 4500 mm wheelbase. It runs on a 4HK1-TC50 engine rated at 205 HP with a manual transmission. The truck carries a 6000L water tank and a 4000L foam tank. A CB10/60 pump (60 L/s at 1.0 MPa) and a roof mounted PS48 monitor (48 L/s, water ≥60 m, foam ≥70 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The Fire Truck Foam Cannon PL24 is a high-efficiency firefighting device for medium- and long-range fire suppression, featuring high flow rate, long range, and stable spray. PL24 fire monitor can switch between direct current and spray modes, improving fire suppression efficiency while maintaining a safe distance, meeting various firefighting needs.

The HOWO 6x4 heavy rescue foam fire truck uses a SINOTRUK HOWO 6x4 chassis with 4600+1400 mm wheelbase. It runs on an MC11.46-61 engine rated at 460 HP with a manual transmission. The truck carries a 14700L water tank and a 3300L foam tank. A CB10/80 fire pump (80 L/s at 1.0 MPa) and a roof mounted PL8/64 monitor (64 L/s, water ≥60 m, foam ≥70 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.