HOWO 25 Meter Aerial Platform Fire Fighting Vehicle

This aerial platform fire truck runs on a D13K540E engine (406 kW) with a 10×4 chassis. It features a 7-section boom system reaching 72m high and 33m out. The truck carries 6,500L of water and 2,000L of foam. Fire Pump ZSP2650 delivers 10,200 L/min, and the roof monitor has an 86m water range. The 300 kg work platform includes auto-leveling. Safety features include overload cutoff, tilt protection, and full LED lighting for night operations.

Fire rescue truck fire pump CB10 140 As core equipment in firefighting systems, fire truck centrifugal pumps are widely used for their efficient water delivery and diverse firefighting needs. With their high flow rates and high lift, centrifugal pumps are widely used in conventional firefighting scenarios, such as urban firefighting and building fires.

The Isuzu GIGA 6X4 10 cubic meter foam fire truck is based on the Isuzu GIGA 6X4 chassis, with a wheelbase of 4600mm+1370mm. It is equipped with an Isuzu 6UZ1-TCG61 engine and a Fast 12-speed transmission. The front of the superstructure houses the equipment compartment, the middle section contains an 8500L carbon steel water tank and a 1500L stainless steel foam tank, and the rear is the pump room, equipped with a CB10/60-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PL8/48 fire monitor is located on the roof.

The ISUZU fire department utility truck for Senegal is built on an ISUZU FVR 4×4 chassis with a 4500 mm wheelbase. It runs on a 4HK1-TC50 engine rated at 205 HP with a manual transmission. The truck carries a 6000L water tank and a 4000L foam tank. A CB10/60 pump (60 L/s at 1.0 MPa) and a roof mounted PS48 monitor (48 L/s, water ≥60 m, foam ≥70 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The ISUZU GIGA 8000L fire tender is powered by a 380 HP 6UZ1-TCG50 engine on a 4×2 chassis. It features a 6000L water tank and a 2000L foam tank, a CB10/60 fire pump (60 L/s), and a PL8/48 monitor (48 L/s, water ≥70m, foam ≥60m). This dual agent fire truck handles Class A and B fires, making it a reliable choice for municipal fire protection, industrial facilities, and oil depots.

MAN 6×6 15,000L water fire truck is driven by a 400 HP D2066 LF06 engine with a 6×6 chassis built for off-road mobility and rough terrain. Water capacity is 15,000L. The CINAR 3000 N pump delivers 3,000 L/min at 10 bar and 250 L/min at 40 bar, while the rear-mounted CINAR monitor reaches 50m with water. Comes standard with hoses, suction line, fittings, and tool kit. Built for large-scale water supply, rural firefighting, and demanding operations where standard fire trucks cannot reach.

MAN 5,000L 4×4 foam fire truck runs on a 250 HP D0836LFL89 engine with a 4×4 chassis that handles rough terrain with ease. Total capacity is 5,000L—4,500L water and 500L foam. The CINAR 3000 N pump puts out 3,000 L/min at 10 bar, and the CINAR 2400 LPM front monitor delivers a 50m water reach. Comes standard with hoses, suction line, fittings, foam gun, and tool kit. Built for industrial sites, rural roads, and coastal areas where seawater compatibility matters.

MAN 5,500L 4×4 foam fire truck is powered by a 290 HP D0836 LFL90 engine with a 4×4 chassis that handles rough terrain with confidence. Total capacity is 5,500L—5,000L water and 500L foam. The JOHSTADT TO 3001 pump delivers 3,000 L/min at both 10 bar and 40 bar, while the CINAR 2400 LPM front monitor reaches 65m with water and 55m with foam. Comes standard with hoses, suction line, fittings, foam gun, and tool kit. Built for industrial sites, rural roads, and demanding fireground operations.