The ISUZU GIGA Heavy-Duty Water Tender is a versatile special-purpose vehicle that integrates firefighting and environmental maintenance capabilities. Built on the ISUZU GIGA 6×4 chassis, it is powered by a 420HP engine and features a massive 16,000L water tank. Equipped with a professional CB10/60 fire pump and a PS8/50W fire monitor with a range of 65 meters, the vehicle boasts a comprehensive water-spraying system, including front flushing, rear sprinkling, and side spraying

The ISUZU 4000L water fire truck runs on a 4HK1-TC engine rated at 175 HP, built on a 4×2 ISUZU chassis. A 4,000L water tank sits behind the cab, with a CB10/30-RS fire pump (30L/s at 1.0MPa) mounted in the rear pump room. A PS8/30W roof monitor delivers a water range of ≥60m, covering a full 360° horizontally and -35° to 70° vertically. The equipment compartments on both sides provide storage for fire hoses, suction tubes, and rescue tools, with all standard accessories included.

SUZU NPR 190HP water pumper rescue truck is built around a 4×2 ISUZU chassis and powered by a 4HK1-TCG61 diesel engine making 190 HP. Behind the cab sits a 4,000 liter water tank. The rear pump room contains a CB10/40 fire pump rated at 40 L/s at 1.0 MPa. On the roof, a PS8/40 monitor shoots water up to 60 meters, turns a full 360°, and tilts from -35° up to 70°. Side compartments hold fire hoses, suction lines, couplings, wrenches, a foam gun, and a basic tool kit—everything needed for initial attack.

The HOWO 6000L water bowser pumper fire truck is built on a HOWO TX 350 4×2 chassis with a 4700 mm wheelbase. It is powered by a MC07H.35-60 engine rated at 350 HP and paired with a manual transmission. The vehicle carries a 6000L water tank. A CB10/60-RS fire pump (60 L/s at 1.0 MPa) and a roof mounted PS60 monitor (60 L/s, ≥60 m range) handle fire suppression. Standard equipment includes fire hoses, suction tubes, couplings, water/foam gun, and basic tool kit.

The SITRAK 8×4 18500L foam fire truck is built on a SITRAK ZZ5446V516MF1 8×4 chassis with a 1950+4600+1400 mm wheelbase. It is powered by an MC11.46-61 engine rated at 460 HP and paired with a manual transmission. The vehicle carries a 12000L water tank and a 6500L foam tank. A Hill CB10/150-8FC fire pump (150 L/s at 1.0 MPa) and a roof mounted Akron PLKD10/100B-5178 monitor (100 L/s, water ≥90 m, foam ≥85 m) handle fire suppression. Standard equipment includes fire hoses, suction tubes, couplings, foam gun, and basic tool kit.

ISUZU GIGA VC66 heavy duty water foam tanker Fire Engine is a professional pumper firefighting vehicle, equipped with 6UZ1-TCG61 diesel engine with 380HP and 9839cc emission.Matched working with a CB10/60 fire pump and a PL8/48 fire monitor on top, with efficiently working distance for water 65 meters and foam 55m. The POWERSTAR foam pumper fire truck is particularly suited for combating complex fires in petrochemical plants, community, ports, and similar environments

This aerial platform fire truck runs on a D13K540E engine (406 kW) with a 10×4 chassis. It features a 7-section boom system reaching 72m high and 33m out. The truck carries 6,500L of water and 2,000L of foam. Fire Pump ZSP2650 delivers 10,200 L/min, and the roof monitor has an 86m water range. The 300 kg work platform includes auto-leveling. Safety features include overload cutoff, tilt protection, and full LED lighting for night operations.

This Isuzu 3cbm water tanker fire truck is based on an Isuzu 100P 4x4 double-cab chassis with a 3360mm wheelbase. It is equipped with an Isuzu 4KB1-TCG60 engine and an MSB 5-speed gearbox. The front of the superstructure houses the equipment compartment, the middle section contains a 300L carbon steel water tank, and the rear is the pump room, equipped with a CB10/60-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PS8/30W fire monitor is mounted on the roof.