The ISUZU GIGA Heavy-Duty Water Tender is a versatile special-purpose vehicle that integrates firefighting and environmental maintenance capabilities. Built on the ISUZU GIGA 6×4 chassis, it is powered by a 420HP engine and features a massive 16,000L water tank. Equipped with a professional CB10/60 fire pump and a PS8/50W fire monitor with a range of 65 meters, the vehicle boasts a comprehensive water-spraying system, including front flushing, rear sprinkling, and side spraying

The Howo NX 290hp RHD fire sprinkler truck features a right-hand drive extended cab, a 7.5 cubic meter fire water tank made of carbon steel, a CB10/40-XZ fire pump at the front of the tank, a PS8/40W fire monitor on the top, a KDP80B(L)(E) diesel water pump unit on the left rear, front and rear spray nozzles, pump inlet and outlet valves, and combines firefighting and water spraying functions. The cab is equipped with a long row of warning lights, left and right turn indicators at the rear, a ladder, and storage boxes on both sides of the tank.

SUZU NPR 190HP water pumper rescue truck is built around a 4×2 ISUZU chassis and powered by a 4HK1-TCG61 diesel engine making 190 HP. Behind the cab sits a 4,000 liter water tank. The rear pump room contains a CB10/40 fire pump rated at 40 L/s at 1.0 MPa. On the roof, a PS8/40 monitor shoots water up to 60 meters, turns a full 360°, and tilts from -35° up to 70°. Side compartments hold fire hoses, suction lines, couplings, wrenches, a foam gun, and a basic tool kit—everything needed for initial attack.

MAN 6×6 15,000L water fire truck is driven by a 400 HP D2066 LF06 engine with a 6×6 chassis built for off-road mobility and rough terrain. Water capacity is 15,000L. The CINAR 3000 N pump delivers 3,000 L/min at 10 bar and 250 L/min at 40 bar, while the rear-mounted CINAR monitor reaches 50m with water. Comes standard with hoses, suction line, fittings, and tool kit. Built for large-scale water supply, rural firefighting, and demanding operations where standard fire trucks cannot reach.

HOWO 6 CBM water fire brigade truck runs on a 350 HP MC07H.35-60 engine with a 4×2 chassis designed for stable urban response. Water tank capacity is 6,000L. The CB10/60-RS pump delivers 60 L/s at 1.0 MPa, while the roof-mounted PS8/40W monitor reaches 65m with water. Comes standard with hoses, suction line, fittings, and tool kit. Built for municipal firefighting, industrial facility protection, and emergency water supply where standard fire trucks cannot meet the flow demand.

MAN 6×6 15,000L water fire truck is driven by a 400 HP D2066 LF06 engine with a 6×6 chassis built for off-road mobility and rough terrain. Water capacity is 15,000L. The CINAR 3000 N pump delivers 3,000 L/min at 10 bar and 250 L/min at 40 bar, while the rear-mounted CINAR monitor reaches 50m with water. Comes standard with hoses, suction line, fittings, and tool kit. Built for large-scale water supply, rural firefighting, and demanding operations where standard fire trucks cannot reach.

MAN 5,000L 4×4 foam fire truck runs on a 250 HP D0836LFL89 engine with a 4×4 chassis that handles rough terrain with ease. Total capacity is 5,000L—4,500L water and 500L foam. The CINAR 3000 N pump puts out 3,000 L/min at 10 bar, and the CINAR 2400 LPM front monitor delivers a 50m water reach. Comes standard with hoses, suction line, fittings, foam gun, and tool kit. Built for industrial sites, rural roads, and coastal areas where seawater compatibility matters.

The Howo TX 4x2 7.5 cubic meter foam fire truck uses the Howo TX chassis with a 4700mm wheelbase. It is equipped with a Weichai WP4.6NQ240E62 engine and a Sinotruk HW95508STCL gearbox. The front of the superstructure is an equipment box for storing auxiliary firefighting equipment. The middle section contains a 5.5 cubic meter carbon steel water tank and a 2 cubic meter stainless steel foam tank. The rear pump room is equipped with a CB10/40-LC(BS) fire pump, control panel, firefighting equipment, PL8/32 fire monitor on the tank top, and two European standard manholes.