Fire Truck Foam Cannon PL24

The Fire Truck Foam Cannon PL48 is a manual fire monitor that can spray both foam and water. It has a rated flow rate of 48 L/s, a rated pressure of 0.8 MPa, a water spray range of ≥70 m, and a foam spray range of ≥60 m. The monitor can rotate 360° horizontally and has an elevation angle of -30° to 70°, offering flexible operation.

This Isuzu 3cbm water tanker fire truck is based on an Isuzu 100P 4x4 double-cab chassis with a 3360mm wheelbase. It is equipped with an Isuzu 4KB1-TCG60 engine and an MSB 5-speed gearbox. The front of the superstructure houses the equipment compartment, the middle section contains a 300L carbon steel water tank, and the rear is the pump room, equipped with a CB10/60-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PS8/30W fire monitor is mounted on the roof.

The Isuzu GIGA 6X4 10 cubic meter foam fire truck is based on the Isuzu GIGA 6X4 chassis, with a wheelbase of 4600mm+1370mm. It is equipped with an Isuzu 6UZ1-TCG61 engine and a Fast 12-speed transmission. The front of the superstructure houses the equipment compartment, the middle section contains an 8500L carbon steel water tank and a 1500L stainless steel foam tank, and the rear is the pump room, equipped with a CB10/60-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PL8/48 fire monitor is located on the roof.

The ISUZU 4000L water fire truck runs on a 4HK1-TC engine rated at 175 HP, built on a 4×2 ISUZU chassis. A 4,000L water tank sits behind the cab, with a CB10/30-RS fire pump (30L/s at 1.0MPa) mounted in the rear pump room. A PS8/30W roof monitor delivers a water range of ≥60m, covering a full 360° horizontally and -35° to 70° vertically. The equipment compartments on both sides provide storage for fire hoses, suction tubes, and rescue tools, with all standard accessories included.

ISUZU GIGA VC66 heavy duty water foam tanker Fire Engine is a professional pumper firefighting vehicle, equipped with 6UZ1-TCG61 diesel engine with 380HP and 9839cc emission.Matched working with a CB10/60 fire pump and a PL8/48 fire monitor on top, with efficiently working distance for water 65 meters and foam 55m. The POWERSTAR foam pumper fire truck is particularly suited for combating complex fires in petrochemical plants, community, ports, and similar environments

The ISUZU 4×2 compact urban fire truck is driven by a 189 HP 4HK1-TCG61 diesel engine, with a nimble 4×2 chassis designed for city streets and narrow alleys. It holds 5,000L total—4,000L water and 1,000L foam. A CB10/40-XZ pump moves 40 L/s at 1.0 MPa, while the PL8/32 roof monitor reaches 60m with water and 48m with foam, ideal for fast response in built-up areas. Standard equipment includes hoses, suction line, couplings, foam gun, and basic tool kit.

The HOWO rescue tender is powered by an MC07H.35-60 engine rated at 350 HP, built on a 4×2 chassis. At the front, a winch with 7000 kg capacity handles vehicle recovery or obstacle clearing. The rear section carries a hydraulic folding crane with a 5-ton lifting capacity and 8.3m reach. The equipment body features roll-up aluminum shutters on both sides, LED lighting, and fold-down steps for easy access. A roof-mounted mast lighting system extends up to 8m, powered by a 15kVA generator for night operations.

The ISUZU fire department utility truck for Senegal is built on an ISUZU FVR 4×4 chassis with a 4500 mm wheelbase. It runs on a 4HK1-TC50 engine rated at 205 HP with a manual transmission. The truck carries a 6000L water tank and a 4000L foam tank. A CB10/60 pump (60 L/s at 1.0 MPa) and a roof mounted PS48 monitor (48 L/s, water ≥60 m, foam ≥70 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.