HOWO 6x4 industrial foam fire truck

The HOWO high pressure foam fire truck is powered by a 300 HP WD615.92 engine on a 4×2 chassis. It features a 6000L water tank and a 2000L foam tank, a CB10/60 fire pump (60 L/s), and a PL8/48 monitor (48 L/s, water ≥65m, foam ≥60m). Standard gear includes fire hoses, suction tubes, couplings, foam gun, and basic tool kit.

The SITRAK HOWO wildland fire truck is built on a 4×2 chassis with a 4700 mm wheelbase and a 350 HP WP8.350E61 engine. It carries a 6000L water tank and a 2000L foam tank. A CB10/100 pump (100 L/s at 1.0 MPa) and a roof mounted PLKD10/80 monitor (80 L/s, water ≥85 m, foam ≥80 m) handle fire suppression. A lifting lighting system with wireless remote control and 360° rotation supports night operations. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The HOWO 4x2 emergency water fire rescue truck is built on a SINOTRUK HOWO 4×2 chassis with a 3800 mm wheelbase. It runs on a YC4E140-33 engine rated at 140 HP with a manual transmission. The truck carries a 4000L water tank and a 2000L foam tank. A CB10/30 pump (30 L/s at 1.0 MPa) and a roof mounted PS30 monitor (30 L/s, water ≥55 m, foam ≥42 m) handle fire suppression. A PH32 foam proportioner (3%-6% mixing ratio, 8-32 L/s flow range) automatically mixes foam concentrate with water. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The HOWO TX 4 ton dry powder emergency fire truck is powered by a 350 HP MC07H.35-60 engine on a 4×2 chassis. It features 2000kg dry powder and 2000kg foam/water tanks, a CB10/60 fire pump (60 L/s), a PF5-15/30 dry powder cannon (30-35kg/s, range ≥35m), and a PL8/48 foam/water monitor (48 L/s, water ≥70m, foam ≥60m). This triple agent truck handles Class A, B, and C fires, making it a versatile choice for industrial fire protection, chemical plants, and oil depots.

The SITRAK 4x2 350HP foam water rescue truck with night lighting is powered by a 350 HP MC07H.35-61 engine on a 4×2 chassis. It features a 7000 kg front winch, a 4500L water tank, a 1600L foam tank, a CB10/60 pump (60 L/s), and a PLDK8/48 monitor (48 L/s, water ≥70m, foam ≥60m). An 8m mast with 2×1000W LED lights and a 15kVA generator supports night operations.

The SITRAK HOWO 18m aerial ladder fire truck is powered by an MC07H.35-60 engine rated at 350 HP, built on a 4×2 chassis. At the front, a winch with 75 kN pulling capacity handles light vehicle recovery or debris clearing. The rear section carries an 18m telescopic ladder system with a 60 L/s CB10/60 fire pump and a roof-mounted PS60 monitor. The equipment body features roll-up aluminum shutters on both sides, LED lighting, and fold-down steps for easy access. The ladder system reaches 18m working height, powered by the truck’s own hydraulic system for firefighting and rescue operations.

The HOWO 6x4 heavy rescue foam fire truck uses a SINOTRUK HOWO 6x4 chassis with 4600+1400 mm wheelbase. It runs on an MC11.46-61 engine rated at 460 HP with a manual transmission. The truck carries a 14700L water tank and a 3300L foam tank. A CB10/80 fire pump (80 L/s at 1.0 MPa) and a roof mounted PL8/64 monitor (64 L/s, water ≥60 m, foam ≥70 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The Howo TX 4x2 7.5 cubic meter foam fire truck uses the Howo TX chassis with a 4700mm wheelbase. It is equipped with a Weichai WP4.6NQ240E62 engine and a Sinotruk HW95508STCL gearbox. The front of the superstructure is an equipment box for storing auxiliary firefighting equipment. The middle section contains a 5.5 cubic meter carbon steel water tank and a 2 cubic meter stainless steel foam tank. The rear pump room is equipped with a CB10/40-LC(BS) fire pump, control panel, firefighting equipment, PL8/32 fire monitor on the tank top, and two European standard manholes.