HOWO 4×4 Fire Truck is a professional firefighting vehicle built on the basis of SINOTRUK HOWO ZZ2167 4×4 off-road chassis. It is equipped with a high-quality fire pump, a 6-cubic-meter water tank, and a 2-cubic-meter foam tank, along with a fire monitor capable of jetting water up to 70 meters and a modular equipment compartment. Powered by a 380-horsepower engine, featuring a part-time four-wheel drive system and off-road tires, this vehicle demonstrates outstanding all-terrain mobility. 

The HOWO TX 460HP foam fire tender is powered by a 460 HP MC11.46-60 engine on an 8×4 chassis. It features a 20000L water tank and a 5000L foam tank, a CB10/120 fire pump (120 L/s), and a PL8/64 monitor (64 L/s, water ≥70m, foam ≥65m). Standard gear includes fire hoses, suction tubes, couplings, foam gun, and basic tool kit. Additional equipment includes monitor control system, liquid level gauge, pressure gauge, emergency lighting, reverse camera, fire extinguisher, grounding device, and PTO control switch.

The SITRAK HOWO 18m aerial ladder fire truck is powered by an MC07H.35-60 engine rated at 350 HP, built on a 4×2 chassis. At the front, a winch with 75 kN pulling capacity handles light vehicle recovery or debris clearing. The rear section carries an 18m telescopic ladder system with a 60 L/s CB10/60 fire pump and a roof-mounted PS60 monitor. The equipment body features roll-up aluminum shutters on both sides, LED lighting, and fold-down steps for easy access. The ladder system reaches 18m working height, powered by the truck’s own hydraulic system for firefighting and rescue operations.

The CB10 30 fire pump adopts a single-stage centrifugal pump structure with a two-piston priming device. The priming device is activated by the pump's rotation and automatically disengages once the required pressure is reached. The product operates stably and is reliable in quality, with various inlet and outlet pipe options available.

ISUZU GIGA VC66 heavy duty water foam tanker Fire Engine is a professional pumper firefighting vehicle, equipped with 6UZ1-TCG61 diesel engine with 380HP and 9839cc emission.Matched working with a CB10/60 fire pump and a PL8/48 fire monitor on top, with efficiently working distance for water 65 meters and foam 55m. The POWERSTAR foam pumper fire truck is particularly suited for combating complex fires in petrochemical plants, community, ports, and similar environments

The Isuzu FVZ GIGA 6 cubic meter foam fire truck is based on the Isuzu FVZ GIGA chassis, with a 4500mm wheelbase. It is equipped with an Isuzu 6HK1-TCG60 engine and a Fast 9-speed transmission. The front of the superstructure houses the equipment compartment, the middle section contains a 5000L carbon steel water tank and a 1000L stainless steel foam tank, and the rear is the pump room, equipped with a CB10/40-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PL8/32 fire monitor is located on the roof.

The ISUZU GIGA Heavy-Duty Water Tender is a versatile special-purpose vehicle that integrates firefighting and environmental maintenance capabilities. Built on the ISUZU GIGA 6×4 chassis, it is powered by a 420HP engine and features a massive 16,000L water tank. Equipped with a professional CB10/60 fire pump and a PS8/50W fire monitor with a range of 65 meters, the vehicle boasts a comprehensive water-spraying system, including front flushing, rear sprinkling, and side spraying

The Isuzu FVR 6 cubic meter foam fire truck uses an Isuzu FVR chassis with a 4500mm wheelbase. It is equipped with an Isuzu 6HK1-TCL engine, a Fast 8-speed transmission, a 5-ton carbon steel water tank (with anti-corrosion treatment), a 1-ton 304 stainless steel foam tank, a Shanghai Xiongzhen CB10/40 low-pressure fire pump (rear-mounted pump room), a Chengdu West PL32 fire monitor, and a 30-meter medium-pressure hose reel in the pump house.