Rescue Fire Truck Fire pump CB10 140

The CB10 30 fire pump adopts a single-stage centrifugal pump structure with a two-piston priming device. The priming device is activated by the pump's rotation and automatically disengages once the required pressure is reached. The product operates stably and is reliable in quality, with various inlet and outlet pipe options available.

The CB10/60 low-pressure vehicle fire pump is characterized by excellent performance, high efficiency, compact structure, aesthetic design, simple operation, and convenient maintenance. It is suitable for medium and heavy-duty water tank fire trucks, foam fire trucks, and water tower fire trucks, etc.

The HOWO high pressure foam fire truck is powered by a 300 HP WD615.92 engine on a 4×2 chassis. It features a 6000L water tank and a 2000L foam tank, a CB10/60 fire pump (60 L/s), and a PL8/48 monitor (48 L/s, water ≥65m, foam ≥60m). Standard gear includes fire hoses, suction tubes, couplings, foam gun, and basic tool kit.

This ISUZU GIGA FVR 4×4 runs on a 300 HP 6HK1-TCG60 diesel engine with a 4×4 chassis built for rough terrain. Total fluid capacity reaches 3,500 liters—split between 3,000L of water and 500L of foam. Fire suppression is handled by a CB10/40-XZ pump (40 L/s) and a PL8/32 roof monitor with 60m water and 48m foam reach. A full set of standard gear comes with the truck, including hoses, suction line, couplings, foam gun, and tool kit.

This Isuzu 3cbm water tanker fire truck is based on an Isuzu 100P 4x4 double-cab chassis with a 3360mm wheelbase. It is equipped with an Isuzu 4KB1-TCG60 engine and an MSB 5-speed gearbox. The front of the superstructure houses the equipment compartment, the middle section contains a 300L carbon steel water tank, and the rear is the pump room, equipped with a CB10/60-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PS8/30W fire monitor is mounted on the roof.

The Howo TX460 6x4 12 cbm foam fire truck adopts a Sinotruk TX 6x4 cab, with a 4600+1400mm wheelbase, and is equipped with a SINOTRUK MC11.46-61 engine and an HW19710 gearbox. The front of the superstructure houses an equipment compartment for storing various firefighting equipment, while the middle section contains a 9 cubic meter carbon steel water tank and a 3 cubic meter foam tank. The rear section houses the pump room, equipped with a CB10/60-RS fire pump, a control panel, and some auxiliary firefighting equipment. The water and foam tanks on the roof are equipped with manholes, and a PL8/48 fire monitor is also included.

The HOWO 6x4 heavy rescue foam fire truck uses a SINOTRUK HOWO 6x4 chassis with 4600+1400 mm wheelbase. It runs on an MC11.46-61 engine rated at 460 HP with a manual transmission. The truck carries a 14700L water tank and a 3300L foam tank. A CB10/80 fire pump (80 L/s at 1.0 MPa) and a roof mounted PL8/64 monitor (64 L/s, water ≥60 m, foam ≥70 m) handle fire suppression. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The HOWO rescue tender is powered by an MC07H.35-60 engine rated at 350 HP, built on a 4×2 chassis. At the front, a winch with 7000 kg capacity handles vehicle recovery or obstacle clearing. The rear section carries a hydraulic folding crane with a 5-ton lifting capacity and 8.3m reach. The equipment body features roll-up aluminum shutters on both sides, LED lighting, and fold-down steps for easy access. A roof-mounted mast lighting system extends up to 8m, powered by a 15kVA generator for night operations.