ISUZU NPR 190HP Water Pumper Fire Rescue Truck

The ISUZU GIGA Heavy-Duty Water Tender is a versatile special-purpose vehicle that integrates firefighting and environmental maintenance capabilities. Built on the ISUZU GIGA 6×4 chassis, it is powered by a 420HP engine and features a massive 16,000L water tank. Equipped with a professional CB10/60 fire pump and a PS8/50W fire monitor with a range of 65 meters, the vehicle boasts a comprehensive water-spraying system, including front flushing, rear sprinkling, and side spraying

The Howo NX 290hp RHD fire sprinkler truck features a right-hand drive extended cab, a 7.5 cubic meter fire water tank made of carbon steel, a CB10/40-XZ fire pump at the front of the tank, a PS8/40W fire monitor on the top, a KDP80B(L)(E) diesel water pump unit on the left rear, front and rear spray nozzles, pump inlet and outlet valves, and combines firefighting and water spraying functions. The cab is equipped with a long row of warning lights, left and right turn indicators at the rear, a ladder, and storage boxes on both sides of the tank.

The ISUZU 4000L water fire truck runs on a 4HK1-TC engine rated at 175 HP, built on a 4×2 ISUZU chassis. A 4,000L water tank sits behind the cab, with a CB10/30-RS fire pump (30L/s at 1.0MPa) mounted in the rear pump room. A PS8/30W roof monitor delivers a water range of ≥60m, covering a full 360° horizontally and -35° to 70° vertically. The equipment compartments on both sides provide storage for fire hoses, suction tubes, and rescue tools, with all standard accessories included.

The Fire Truck Foam Cannon PL24 is a high-efficiency firefighting device for medium- and long-range fire suppression, featuring high flow rate, long range, and stable spray. PL24 fire monitor can switch between direct current and spray modes, improving fire suppression efficiency while maintaining a safe distance, meeting various firefighting needs.

The Fire Truck Foam Cannon PL48 is a manual fire monitor that can spray both foam and water. It has a rated flow rate of 48 L/s, a rated pressure of 0.8 MPa, a water spray range of ≥70 m, and a foam spray range of ≥60 m. The monitor can rotate 360° horizontally and has an elevation angle of -30° to 70°, offering flexible operation.

This Isuzu 3cbm water tanker fire truck is based on an Isuzu 100P 4x4 double-cab chassis with a 3360mm wheelbase. It is equipped with an Isuzu 4KB1-TCG60 engine and an MSB 5-speed gearbox. The front of the superstructure houses the equipment compartment, the middle section contains a 300L carbon steel water tank, and the rear is the pump room, equipped with a CB10/60-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PS8/30W fire monitor is mounted on the roof.

The Isuzu GIGA 4.5 CBM foam fire truck uses the Isuzu GIGA 4x2 Class II fire truck chassis, with a 4600mm wheelbase, an Isuzu 6UZ1-TCG50 engine, and a FAST 12-speed gearbox. The front of the superstructure houses the equipment compartment, with a 4 cubic meter carbon steel water tank and a 500L stainless steel foam tank in the middle. The rear houses the pump room, equipped with a CB10/60-RS fire pump, control panel, fire hoses, and a PL8/48 fire monitor mounted on the roof.

This Isuzu pickup fire truck is based on the Isuzu TAGA QL1030CZHW2 Luxury Edition 3.0T diesel 143hp four-wheel drive double-cab pickup chassis, It is equipped with an Isuzu 4HK1CT6H1 engine and an MLB 5-speed transmission. The front of the superstructure features a 500L carbon steel water tank and a 100L stainless steel foam tank. The rear houses the pump room, equipped with a JBQ4.5/9 hand pump, a 50m electric hose reel, and a PH64 foam-water mixing proportioner. The roof features a PS8/20W fire monitor, ladder, manhole, and fire alarm lights.