ISUZU 4X2 rescue fire engine and rescue pumper

This aerial platform fire truck runs on a D13K540E engine (406 kW) with a 10×4 chassis. It features a 7-section boom system reaching 72m high and 33m out. The truck carries 6,500L of water and 2,000L of foam. Fire Pump ZSP2650 delivers 10,200 L/min, and the roof monitor has an 86m water range. The 300 kg work platform includes auto-leveling. Safety features include overload cutoff, tilt protection, and full LED lighting for night operations.

The HOWO 25 meter aerial platform fire truck runs on an MC07H.35-60 engine (257 kW) with a HOWO 4×2 chassis. It features a 4-section telescopic ladder reaching 25m high and 15m out. The truck carries 2,000L of water and 350L of foam. A CB10/60-MBP pump delivers 3,600 L/min, and the roof monitor has a 65m range. The 300 kg work platform includes auto-leveling. Safety features include overload cutoff, tilt protection, and a 5m LED mast light for night operations.

SUZU NPR 190HP water pumper rescue truck is built around a 4×2 ISUZU chassis and powered by a 4HK1-TCG61 diesel engine making 190 HP. Behind the cab sits a 4,000 liter water tank. The rear pump room contains a CB10/40 fire pump rated at 40 L/s at 1.0 MPa. On the roof, a PS8/40 monitor shoots water up to 60 meters, turns a full 360°, and tilts from -35° up to 70°. Side compartments hold fire hoses, suction lines, couplings, wrenches, a foam gun, and a basic tool kit—everything needed for initial attack.

The ISUZU 4000L water fire truck runs on a 4HK1-TC engine rated at 175 HP, built on a 4×2 ISUZU chassis. A 4,000L water tank sits behind the cab, with a CB10/30-RS fire pump (30L/s at 1.0MPa) mounted in the rear pump room. A PS8/30W roof monitor delivers a water range of ≥60m, covering a full 360° horizontally and -35° to 70° vertically. The equipment compartments on both sides provide storage for fire hoses, suction tubes, and rescue tools, with all standard accessories included.

The HOWO rescue tender is powered by an MC07H.35-60 engine rated at 350 HP, built on a 4×2 chassis. At the front, a winch with 7000 kg capacity handles vehicle recovery or obstacle clearing. The rear section carries a hydraulic folding crane with a 5-ton lifting capacity and 8.3m reach. The equipment body features roll-up aluminum shutters on both sides, LED lighting, and fold-down steps for easy access. A roof-mounted mast lighting system extends up to 8m, powered by a 15kVA generator for night operations.

The Howo TX 4x2 7.5 cubic meter foam fire truck uses the Howo TX chassis with a 4700mm wheelbase. It is equipped with a Weichai WP4.6NQ240E62 engine and a Sinotruk HW95508STCL gearbox. The front of the superstructure is an equipment box for storing auxiliary firefighting equipment. The middle section contains a 5.5 cubic meter carbon steel water tank and a 2 cubic meter stainless steel foam tank. The rear pump room is equipped with a CB10/40-LC(BS) fire pump, control panel, firefighting equipment, PL8/32 fire monitor on the tank top, and two European standard manholes.